Additional tank LRA 125L Toyota FJ Cruiser

The auxiliary tank LRA is designed for Toyota FJ Cruiser GSJ15R petrol Wagon 4WD body, from 2011 to 2012. With its capacity to 125 litersIt allows the vehicle's fuel range to be increased for travel, expeditions, tracks and travel in isolated areas, while retaining the original main tank.

This tank mounts under the rear of the vehicle, behind the rear axle, with a standard exhaust. The original filler point is replaced with a new dual filler point. Fuel is transferred to the original tank by an electric pump, controlled by a switch with a gauge installed in the passenger compartment. The instructions also indicate the installation of a 0–90 ohm gauge specifically for the auxiliary tank.

Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application to optimize available volume while respecting the chassis's mechanical constraints. The tanks LRA They are made of 2mm T125CQ steel. They incorporate internal baffling to limit fuel movement, as well as an expansion chamber. Before being sold, they undergo pressure tests and several quality control checks. Tests are also carried out over dozens of kilometers of heavily degraded tracks. These tests verify the tank's resistance to vibrations, repeated twisting, impacts, and the stresses of prolonged off-road use.

Technical specifications:

- Type: Auxiliary tank
- Capacity: 125 liters
- Vehicle compatibility: Toyota FJ Cruiser GSJ15R
- Compatible years: 2011 to 2012
- Compatible engine type: Petrol
- Body type: Wagon
- Transmission: 4WD
- Required configuration: Model with original single tank only
- Position: Behind the rear bridge
- Exhaust: Standard
- Filling point: Double filling point
- Transfer pump: Electric pump included
- Gauge: Switch with gauge LRA-PG210 and 0–90 ohm gauge
- Spare wheel: Retained
- Estimated assembly time: 5 hours
- Made in Australia