Replacement tank LRA 110L Toyota Land Cruiser BJ40 FJ40

The replacement tank LRA is designed for Toyota Land Cruiser BJ40 diesel and FJ40 petrol, short wheelbase 4-wheel drive, from 1970 to 1979. It replaces the original tank located under the seat and increases the fuel capacity to 110 litresThis additional capacity allows for carrying more fuel for travel, tracks, raids and movement in isolated areas.

Installed under the seat, this tank utilizes the available space beneath the left-hand side seat. The filler neck remains standard, and the original fuel gauge unit is relocated to the new tank. The instructions indicate that the fuel lines and gauge cables must be repositioned. The filler neck cover may require adjustment due to the new neck orientation. The spare tire remains in place. The suggested seat mount modification is not suitable for left-hand drive vehicles.

Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application to optimize available volume while respecting the chassis's mechanical constraints. The tanks LRA They are made of 2mm T125CQ steel. They incorporate internal baffling to limit fuel movement, as well as an expansion chamber. Before being sold, they undergo pressure tests and several quality control checks. Tests are also carried out over dozens of kilometers of heavily degraded tracks. These tests verify the tank's resistance to vibrations, repeated twisting, impacts, and the stresses of prolonged off-road use.

Technical specifications:

- Type: Replacement tank
- Capacity: 110 liters
- Vehicle compatibility: Toyota Land Cruiser BJ40 and FJ40
- Compatible years: 1970 to 1979
- Compatible engines: BJ40 diesel and FJ40 petrol
- Bodywork: short wheelbase
- Transmission: 4-wheel drive
- Position: under the seat
- Replaced fuel tank: original under-seat fuel tank
- Exhaust: standard
- Filling point: standard
- Gauge: Original gauge unit relocated to the new tank
- Spare wheel: retained
- Special feature of the installation: fuel lines and gauge cables need to be repositioned
- Left-hand drive specific feature: suggested modification of the seat support not suitable
- Estimated assembly time: 3 hours
- Made in Australia