Replacement tank LRA 115L Isuzu DMax
Nie udało się wczytać dostępności odbioru osobistego
- 100% bezpieczna płatność
- Sprzęt przetestowany i zatwierdzony
- Szybka i ostrożna wysyłka
Masz pytania dotyczące tego produktu?
Jesteśmy tutaj, aby Ci pomóc.
The replacement tank LRA is designed for the Isuzu D-Max MY09, MY10 and MY11 diesel, in Dual bodywork, with automatic transmission. With its capacity of 115 liters, it replaces the original tank in order to increase fuel autonomy for trips, raids, tracks and travel in isolated areas.
Installation and compatibility
This tank is installed on the left side of the driveshaft, with standard exhaust, original filling point and spare wheel retained. The instructions indicate the removal of the original tank, the replacement of the original pump/gauge assembly, the shortening of the fill hose by 35 mm, the shortening of the quick fill hose by 130 mm, the modification of the float arm, the temporary removal of the drive shaft, the installation of a front secondary support and the repositioning of the deck breather to a suitable high point.
Manufacture and design LRA
Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application in order to optimize the available volume while respecting the mechanical constraints of the chassis. Tanks LRA are made from 2mm T125CQ steel. They incorporate internal partitioning to limit fuel movements, as well as an expansion chamber. Before marketing, they are subjected to pressure tests and several quality controls. Tests are also carried out on tens of kilometers of severely degraded tracks. These tests make it possible to check the resistance of the tank to vibrations, repeated twisting, impacts and the stresses of prolonged off-road use.
Technical characteristics
| Kind | Replacement tank |
|---|---|
| Capacity | 115 litres |
| Vehicle compatibility | Isuzu D-Max MY09, MY10 and MY11 2008 to 2011 |
| Engine compatible | Diesel |
| Body | Dual |
| Transmission | 4WD; 2WD for Holden Colorado RC |
| System requirements | Automatic transmission only |
| Tank replaced | Original tank |
| Position | Left side of driveshaft |
| Exhaust | Standard |
| Filling point | Standard |
| Gauge | Original pump/gauge assembly reused, float arm to be modified |
| Spare wheel | Preserved |
| Special incompatibilities | Not compatible with manual transmission |
| Estimated assembly time | 3 hours |
| Manufacturing | Australia |
Product reference : LRA-HR4DRA7ATR
