Replacement tank LRA 155L Toyota Land Cruiser HZJ75 FZJ75 HZJ79 FZJ79 VDJ79

The replacement tank LRA is designed for Toyota Land Cruiser FZJ75, HZJ75, FZJ79, HZJ79 and VDJ79 in Cab Chassis 4WD body style. With its capacity to 155 litersIt replaces the original rear tank on the original dual-tank models, in order to increase fuel range for travel, expeditions, tracks and travel in remote areas.

This tank is positioned behind the rear axle, retaining the standard exhaust and original filler neck. The instructions indicate that the original filler neck and fuel gauge are retained, and that installation requires partially cutting the original tank's front bracket so that the new front mount sits correctly under the round crossmember. The spare tire is retained.

Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application to optimize available volume while respecting the chassis's mechanical constraints. The tanks LRA They are made of 2mm T125CQ steel. They incorporate internal baffling to limit fuel movement, as well as an expansion chamber. Before being sold, they undergo pressure tests and several quality control checks. Tests are also carried out over dozens of kilometers of heavily degraded tracks. These tests verify the tank's resistance to vibrations, repeated twisting, impacts, and the stresses of prolonged off-road use.

Technical specifications:

- Type: Replacement tank
- Capacity: 155 liters
- Vehicle compatibility: Toyota Land Cruiser FZJ75, HZJ75, FZJ79, HZJ79, VDJ79
- Compatible years: FZJ75 1992-1999 / FZJ79 2000-2005 / HZJ75 1992-1999 / HZJ79 1999-2006 / VDJ79 2007-2015 / VDJ79 2016 before 08/2016
- Compatible engine types: Petrol and diesel
- Bodywork: Cab Chassis
- Transmission: 4WD
- Required configuration: Original dual-tank model
- Replaced tank: Original rear tank
- Position: Behind the rear bridge
- Exhaust: Standard
- Filling point: Standard, original filling level retained
- Gauge: Original gauge preserved
- Spare wheel: Retained
- Special compatibilities: Compatible with Tow bar Toyota PZQ64-60070
- Specific incompatibilities: Not compatible with Tow bars Toyota PZQ64-60074 and PZQ64-60073; use -HDTB
- Estimated assembly time: 3 hours
- Made in Australia