Replacement tank LRA 180L Toyota Land Cruiser VDJ76

The replacement tank LRA is designed for Toyota Land Cruiser VDJ76 diesel in Wagon 4WD body style, from August 2012. With its capacity to 180 litersIt replaces the standard 130-litre tank to increase fuel range for travel, raids, tracks and travel in isolated areas.

This tank is located behind the rear axle, with the standard exhaust and original filler neck retained. The spare tire remains in place. The instructions describe removing the original tank and its cradle, reusing the original fuel gauge with replacement of the float arm, and reusing the original hoses and clamps for filling, fuel supply, and return.

Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application to optimize available volume while respecting the chassis's mechanical constraints. The tanks LRA They are made of 2mm T125CQ steel. They incorporate internal baffling to limit fuel movement, as well as an expansion chamber. Before being sold, they undergo pressure tests and several quality control checks. Tests are also carried out over dozens of kilometers of heavily degraded tracks. These tests verify the tank's resistance to vibrations, repeated twisting, impacts, and the stresses of prolonged off-road use.

Technical specifications:

- Type: Replacement tank
- Capacity: 180 liters
- Vehicle compatibility: Toyota Land Cruiser VDJ76
- Compatible years: From August 2012, models from 2012 to 2023
- Compatible engine type: Diesel
- Body type: Wagon
- Transmission: 4WD
- Required configuration: Model with standard 130-liter tank
- Tank replaced: Standard 130-liter tank
- Position: Behind the rear bridge
- Exhaust: Standard
- Filling point: Standard
- Gauge: Original gauge reused with specific float arm supplied
- Spare wheel: Retained
- Special compatibilities: Compatible with Tow bar Toyota PZQ64-60195 and rear bumper KAYMAR
- Specific incompatibilities: Not compatible with 2.8 engine L 4 cylinders
- Estimated assembly time: 3 hours
- Made in Australia