Main replacement tank LRA Toyota Landcruiser HDJ80 BVM 145L

The reservoir of LRAFrom a renowned Australian manufacturer, this is a high-capacity replacement fuel tank designed for the Toyota Land Cruiser HDJ80, replacing the main fuel tank. With a capacity of 145 liters, it significantly increases the original tank's capacity by approximately 50 liters, effectively replacing the original 95-liter tank. On models equipped with dual fuel tanks, it increases the total onboard capacity while retaining the existing secondary tank. This results in a considerable increase in range without the need for a jerrycan or an external auxiliary fuel tank. Another important benefit is that this installation leaves the spare tire well-positioned, a crucial feature for demanding off-road or expedition use.

Designed and manufactured in Australia by LRAThis off-road fuel tank features a robust construction made of 2mm electro-galvanized steel, laser-cut and assembled using MIG welding. It incorporates internal baffling and an expansion chamber to ensure a stable fuel supply, even under extreme conditions. Pressure-tested and subjected to double quality control, it guarantees reliability and durability for intensive 4x4 use. As specified in the installation instructions, this tank completely replaces the original front tank and requires modification of the float (+70mm) and the suction tube to ensure accurate gauge readings and optimal fuel delivery. This long-range fuel tank LRA is a very practical 4x4 fuel accessory for off-road enthusiasts and Voyage Llong distance, offering secure fuel transport, increased range and perfect integration with the Land Cruiser HDJ80 chassis.

Features:

- Type: Replacement (main) tank

- Capacity: 145 liters (±5L)
- Original capacity replaced: ~90 to 95 liters (depending on version)
- Increased capacity: approximately +50 liters

- Vehicle compatibility: Toyota Land Cruiser HDJ80 (1990–1998 – Diesel – manual transmission – original dual fuel tank)

- Position: left side of the driveshaft

- Exhaust: standard

- Filling point: origin

- Spare wheel replacement: NO (retained in original location)

- Material: 2 mm type T125CQ electro-galvanized steel

- Manufacturing: laser cutting + MIG welding

- Internal structure: partitions + expansion chamber

- Quality control: pressure test + double quality control

- Fuel system compatibility: reuses the original plunger/pump and gauge

- Adaptations necessary (assembly):
Float extension (~70 mm)
Modification of the suction tube (pickup)
Adjusting the backup sensor to prevent premature triggering

- Mounting kit included:
Tank straps (front/rear)
Reinforced supports and mounting plates
Complete set of screws (Nylstop nuts, bolts, washers)
Fuel hoses and fittings

- Estimated assembly time: approximately 4 hours

- Dimensions (packaged): 135 x 60 x 50 cm

- Weight (packaged): 48 kg

- Recommendation: Professional installation strongly advised

- Made in Australia