Replacement tank LRA 155L Toyota Land Cruiser FZJ75 HZJ75 HZJ78 VDJ78

The replacement tank LRA is designed for Toyota Land Cruiser FZJ75, HZJ75, HZJ78 and VDJ78 in Troopy 4-wheel drive version. It replaces the original rear auxiliary tank on models equipped with a Toyota dual tank and increases its capacity to 155 liters. This additional capacity allows for carrying more fuel for long-distance travel, tracks, raids, and travel in isolated areas.

Positioned behind the rear axle, this tank retains the original filler point and fuel gauge unit. The standard exhaust is retained, and the spare tire remains in place. LRA specifies that this model is not compatible with theTow bar Toyota Heavy DutyThe instructions also indicate a modification to the original tank's front support to allow for the positioning of the new mounting bracket.

Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application to optimize available volume while respecting the chassis's mechanical constraints. The tanks LRA They are made of 2mm T125CQ steel. They incorporate internal baffling to limit fuel movement, as well as an expansion chamber. Before being sold, they undergo pressure tests and several quality control checks. Tests are also carried out over dozens of kilometers of heavily degraded tracks. These tests verify the tank's resistance to vibrations, repeated twisting, impacts, and the stresses of prolonged off-road use.

Technical specifications:

- Type: Replacement tank
- Capacity: 155 liters
- Vehicle compatibility: Toyota Land Cruiser FZJ75, HZJ75, HZJ78 and VDJ78
- Bodywork: Troopy
- Transmission: 4-wheel drive
- Required configuration: model with original dual fuel tank
- Tank replaced: original rear auxiliary tank
- Position: behind the rear axle
- Exhaust: standard
- Filling point: standard
- Gauge: original gauge unit retained
- Spare wheel: retained
- Specific incompatibility: Tow bar Toyota Heavy Duty
- Special assembly requirement: modification of the original tank's front support according to instructions LRA
- Estimated assembly time: 3 hours
- Made in Australia