Replacement tank LRA 130L Isuzu DMax
Couldn't load pickup availability
- 100% secure payment
- Equipment Tested & Approved
- Fast & Careful Shipping
Questions about this Product?
We are here to help you.
The replacement tank LRA is designed for theIsuzu D-Max diesel, in Single, Dual or Extra bodywork, from 2012 to 2020. With its capacity of 130 liters, il replaces the original tank in order to increase fuel autonomy for travel, raids, tracks and travel in isolated areas.
Installation and compatibility
This tank is installed on the left side of the driveshaft, with standard exhaust, original filling point and spare wheel retained. The LRA page specifies that this model is suitable for 4WD versions with a single-piece driveshaft, as well as 2WD High-Rider versions with a single-piece driveshaft. The instructions indicate the removal of the standard reservoir, the temporary removal of the transmission shaft, the reassembly of the original gauge/sample assembly, the connection of the filling and breather hoses, as well as the modification of the parking brake cable support on D-Max vehicles.
Manufacture and design LRA
Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application in order to optimize the available volume while respecting the mechanical constraints of the chassis. Tanks LRA are made from 2mm T125CQ steel. They incorporate internal partitioning to limit fuel movements, as well as an expansion chamber. Before marketing, they are subjected to pressure tests and several quality controls. Tests are also carried out on tens of kilometers of severely degraded tracks. These tests make it possible to check the resistance of the tank to vibrations, repeated twisting, impacts and the stresses of prolonged off-road use.
Technical characteristics
| Kind | Replacement tank |
|---|---|
| Capacity | 130 liters |
| Vehicle compatibility | Isuzu D-Max 2012 to 2020 |
| Engine compatible | Diesel |
| Body | Single, Dual or Extra |
| Transmission | 4WD; 2WD High-Rider depending on vehicle |
| System requirements | Single-piece driveshaft |
| Tank replaced | Original tank |
| Position | Left side of driveshaft |
| Exhaust | Standard |
| Filling point | Standard |
| Spare wheel | Preserved |
| Special compatibility | Filling may require modification on vehicles equipped with a skip tray |
| Special incompatibilities | Not compatible with MY21 model; may interfere with a drawer under dumpster |
| Estimated assembly time | 3 hours |
| Manufacturing | Australia |
Product reference: LRA-HCRGDCR
